83458345834583458345
specifications
Engine:
 
Power Take Off :
 
Transmission:

Model D243C
4 Cylinder / 4 Stroke
289 cu. in. Direct Injection
Liquid-Cooled Diesel


Max. hp (mfr.rating) ———— 80
Rated rpm —————— 2,200

Bore       ——————    4.33 in.
Stroke    ——————    4.92 in.

Mechanical Governor
Centrifugal Oil Filter
Oil Bath Air Cleaner
75 HP


 540 PTO @ 2,106 RPM
(6 spline shaft)


1000 PTO @ 2,310 RPM

(21 spline shaft)


synchronized 3.2 rpm/1 yard with 16.9 x 38 tires
Mechanical Synchromesh with high/low range and speed reducer (note: high/low ranges 1st, 2nd gear and reverse are not synchronized)
14 forward, 4 reverse

        Dry, single disc clutch Speeds:                                         
Forward ———— 1.6 - 22.9 mph
Reverse ———— 3.3  -  7.5 mph


   Optional Synchromesh w/Shuttle Shift
9 Forward, 8 Reverse

Speeds:                             
Forward ———— 2.3 - 24.7 mph
Reverse ———— 2.1 - 12.4 mph
Tires,Fluid Cap. & Shipping Weight:
Hydraulic Sytem:
 
Standard Equipment:
 

Tires:                                              
  Front ———— 360/70R24
  Rear ———— 18.4 x 34 6-ply


Fluid Capacities:                           
 Fuel Tank——————  34 gal.
 Cooling System ———— 20  qt.
 Air Cleaner Pan ————1.6 qt.
 Engine Sump ————— 16  qt.
 Transmission ————— 42  qt.
 Hydraulics —————— 23  qt.

3-pt. hitch, position and draft control, 3 remotes

Pump Output:
                  12.0 gpm @ 2,200 rpm
                  11.8 gpm @ 1,800 rpm
Pressure:            2,565 - 2,850 psi

Lift Capacity:
(end of lower links)        4,366 lbs.
Hitch - Cat. II - 2 position lower link points
Hydrostatic steering, tilt and telescoping steering wheel, hand and foot throttle, 2 speed PTO(540/1,000), differential lock, 12 volt electrical system with 24 volt starting circuit, rear window wipers, front windshield washer, cleanable engine oil and air filters, front-end weights, swinging draw bar, 3 pt. hitch
Shipping Weight:                           

8700 lbs.
Belarus Tractor International, Inc. reserves the right to change design and specifications without notice.